Promotion
Si vous ne trouvez pas le modèle que vous cherchez parmis nos marques, ne vous inquiétez pas!
Demandez à nos professionnels et nous le commanderons pour vous.
Spécifications
- Manufacturier : Case IH
- Modèle : SB541C
- Type : Presses à Balles Carrées
- Bale Cross Section - Height Inches [ Mm ] : 14 [356]
- Bale Cross Section - Width Inches [ Mm ] : 18 [457]
- Bale Length Range - Minimum Inches [ Mm ] : 12 [305]
- Bale Length Range - Maximum Inches [ Mm ] : 52 [1321]
- Density Control, Standard : Adj Hydraulic Density
- Bale Thrower Compatible : No
- Pickup Position : Offset To Right Side
- Sweep Width On Flare Inches [ Mm ] : 80 [2032]
- Sweep Width Inside Inches [ Mm ] : 75 [1905]
- Width Between Outside Tines Inches [ Mm ] : 67.5 [1714]
- Tine Spacing Inches [ Mm ] : 2.63 [67]
- Number Of Tines : 156
- Number Of Tine Bars : 6
- Windguard Description : 13 Rods
- Standard Pickup Lift : Hydraulic
- Pickup Protection : V-belt Slippage & Lost Motion Reel Drive
- Feeder Description : Rotary Feeder W/ Packer
- Feeder Opening Inches² [ Cm² ] : 284 [1832] , Right Side Entry
- Plunger Speed, Strokes/min : 93
- Plunger Stroke Inches [ Mm ] : 30 [762]
- Tying Mechanism Type : Hd Knotter
- Tying Capacity (twine), Balls : 8 Balls
- Flywheel Diameter Inches [ Mm ] : 22 [559]
- Flywheel Weight Lbs [ Kg ] : 248 [112]
- Pto Driveline : Std Three-joint, Category 6
- Pto Speed Rpm : 540
- Main Drive Protection : Shearbolt, Overrunning & Slip Clutches
- Standard Tire, Left : 14l X 16.1, 6pr
- Standard Tire, Right : 11l X 14, 6pr
- Max. Height Inches [ Mm ] : 71 [1803]
- Width Inches [ Mm ] : 120 [3048]
- Length W/o Bale Chute Inches [ Mm ] : 217 [5512]
- Length W/bale Chute Inches [ Mm ] : 259 [6580]
- Weight W/twine Tie Lbs [ Kg ] : 3940 [1787]
- Tractor Pto Power Hp [ Kw ] : 75 [56]
